Do you know the installation steps of linear guides? The first step in the installation of the linear guide rail is to place the guide rail on the installation surface, and the datum surface and the threaded hole should be aligned at this time; the second step is to install the screw, which is very simple when the two match. Once it is inappropriate, it is necessary to modify the threaded holes with an awl, and then tighten all the screws; (3) The third part is to install the auxiliary rail; (4) After installation, a comprehensive and detailed inspection should be carried out to ensure the installation. There is no problem with the final accuracy. Generally, it is checked with optical instruments first. After passing the test, the dustproof holes can be fixed and put into use. If it is unqualified, the installation steps must be checked again to ensure that it can be used normally and the accuracy is not damaged.

If the accuracy is distorted due to the replacement of the slider, it will cause problems for the treatment of patients in the subsequent use, and it will cause great trouble, or even cause human accidents, and the consequences are unimaginable.